Taillightscovers.com specializes in film tail light covers. These tint tail light covers are available in adhesive backed and blackout static cling versions. Whether you want to tint your tail lights with removable blackout covers or semi-permanent adhesive tail light tint covers we offer the widest variety of tail light tinting covers on the market. And if that isn't enough, we also offer a full line or headlight covers and light cover film too!
Light Cover Film in a Blue Smoke shade is a Blue light tint film which is a custom trim-to-fit light cover. It blocks 17% of light transmission and is sold in adhesive backed sheets. Blue Smoke Light Cover Film can be applied to any light! Most popular uses are for headlights, tail lights and turn signal portions.
Light Cover Film is designed to be heat conformed to curved lights!
Blue Smoke Light Cover Film is universal, apply to any light.
Gives any OEM or After-Market Light Blue smoke look.
Applies similarly to decal or sticker using a wet application method.
Carries a 3 year warranty, designed to last up to five years.
Step by Step application instructions available online.
Genuine Rtint product.
Sold in widths of 24 inches and lengths up to 120 inches in size.
Can be removed with out damaging your lights.
Installation video shows basic tips and tricks on how to apply light cover film.
What Light Cover Film application tools do you recommend?
We recommends the use of an application squeegee which will reduce air bubbles during installation and aide in heat conforming the tint to your light. By using a low friction sleeve, you will reduce the chance of scratching your light cover film during application. Application solutions such as Rapid Clear will remove any dirt or debris from your lights and Rapid Tac will aide in the wet application of our adhesive backed tint kits. We strongly recommend the use of these products to achieve professional results.
What is the difference between Light Cover Film and Protection film?
Protection Kits are generally made from an optically clear 17mil - 20mil (.17" - .020") thick film. Light Cover Film on the other hand is a tint film made from a transparent vinyl which is 3mil (.003") thick. These films are not made from urethane, do not use optically clear adhesives, reduce light transmission and provide no light protection. They are designed to change the shade of the light housing, but not protect it.
What is the difference between Light Cover Film and Pre-Cut Light Cover Kits?
Light Cover Film is sold by the sheet and it is designed to be trimmed-to-fit to the light housing. Pre-Cut Light Cover kits are pre-cut in the shape of a model specific Light and come ready to be applied.
Are your color films legal on Lights for street use?
Clear films are legal. Our color light cover films may not be legal for street use on primary lighting. Please check your state or local laws before application. Our color films do not produce a blue or Blue light when lit. All non-clear films are intended for off-road show car use only.
